Finishes
|
|
|
|
Aluminum
(AL) |
Dark Stainless Steel
(DSS) |
Bronze
(BZ) |
Copper
(C) |
|
|
|
|
Nickel Silver
(NS)
|
Stainless Steel
(SS)
|
|
Zinc
(ZN) |
Custom finishes such as Rose Gold, Dark Stainless
Steel, Light Bronze and hybrid metals are available on a custom
basis.
Note: Color and brightness of metal finish may vary by design
due to the individual response of each pattern to the multistep
finishing/polishing procedure. Certain metals, particularly standard
brass and aluminum, are subject to color variations between production
lots; therefore, preproduction submittal samples are suggested.
Solid Color
Most opaque colors
are achievable with reasonable accuracy subject to the parameters
of the Gagecast® process. Gage will match
to your supplied sample chip or Pantone® number.
Combination Finishes
All standard
designs, except those marked by an asterisk (*), are available
in a two finish combination. Specify two metals or metal pattern
with solid color field (to match specifier’s
sample). Gage will provide a pre-production strike off for
specifier’s approval prior to production on all non-standard
or combination finishes.
|
